-
-
Available Formats
- Availability
- Priced From ( in USD )
-
Available Formats
-
- Immediate download
- $160.96
- Add to Cart
-
- Printed Edition
- Ships in 1-2 business days
- $160.96
- Add to Cart
Customers Who Bought This Also Bought
-
CEI EN 181104
Priced From $77.50 -
CEI EN 50520
Priced From $46.20 -
CEI EN IEC 63044-5-1
Priced From $62.60 -
CEI EN IEC 61158-5-2
Priced From $522.68
About This Item
Full Description
This document deals with the techniques for sampling free gases from gas-collecting relays from power transformers. Three methods of sampling free gases are described.
The techniques for sampling oil from oil-filled equipment such as power and instrument transformers, reactors, bushings, oil-filled cables and oil-filled tank-type capacitors are no longer covered by this document, but are instead described in IEC 60475:2022, 4.2.
Before analysing the gases dissolved in oil, they are first extracted from the oil. Three basic methods are described, one using extraction by vacuum (Toepler and partial degassing), another by displacement of the dissolved gases by bubbling the carrier gas through the oil sample (stripping) and the last one by partition of gases between the oil sample and a small volume of the carrier gas (headspace). The gases are analysed quantitatively after extraction by gas chromatography; a method of analysis is described. Free gases from gas-collecting relays are analysed without preliminary treatment.
The preferred method for ensuring the performance of the gas extraction and analysis equipment, considered together as a single system, is to degas samples of oil prepared in the laboratory and containing known concentrations of gases ("gas-in-oil standards") and quantitatively analyse the gases extracted. Two methods of preparing gas-in-oil standards are described.
For daily calibration checks of the chromatograph, it is convenient to use a standard gas mixture containing a suitable known amount of each of the gas components to be in a similar ratio to the common ratios of the gases extracted from transformer oils.
The techniques described take account, on the one hand, of the problems peculiar to analyses associated with acceptance testing in the factory, where gas contents of oil are generally very low and, on the other hand, of the problems imposed by monitoring equipment in the field, where transport of samples can be by un-pressurized air freight and where considerable differences in ambient temperature can exist between the plant and the examining laboratory.
Document History
-
CEI EN IEC 60567
viewing
Oil-filled electrical equipment - Sampling of free gases and analysis of free and dissolved gases in mineral oils and other insulating liquids - Guidance- Most Recent
-
CEI EN 60567
Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance- Historical Version