-
-
Available Formats
- Availability
- Priced From ( in USD )
-
Available Formats
-
- Immediate download
- $64.00
- Add to Cart
-
- Printed Edition
- Ships in 1-2 business days
- $64.00
- Add to Cart
Customers Who Bought This Also Bought
-
DANSK DS/EN 60601-1-8
Priced From $119.00 -
DANSK DS/ISO/TR 14253-6
Priced From $64.00 -
DANSK DS/ISO/IEC 24787
Priced From $153.00 -
DANSK DS/ISO/TS 15000-1
Priced From $176.00
About This Item
Full Description
IEC 60794-1-111: 2023 defines the test procedure to determine the ability of an optical fibre cable to withstand bending around a test mandrel. The primary purpose of this procedure is to measure the change in attenuation when the cable is bent around a test mandrel. A secondary purpose is to assess whether the cable has been physically damaged by bending. NOTE 1 This test can be utilized at any specified temperature, including the low or high temperature limits for the cable. NOTE 2 The bend test procedure for cable elements is specified in IEC 60794-1-301, method G1. This document partially cancels and replaces IEC 60794-1-21:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 60794‑1‑21:2015: a) the nominal sample length was newly specified as 10 m between the cable element fixing points at both ends, unless otherwise specified; b) the number of turns on the mandrel in Figure 1 for the single-helix configuration were corrected to match the number of turns shown in the figure for the two-helix configuration; c) requirements on the turnaround loop were added for method E11A, two-helix configuration; d) the turnaround loop with the same diameter as the mandrel was taken into account for calculation of the number of turns of each helix for method E11A, two-helix configuration; e) added a formula for calculation of the number of revolutions in each helix for method E11A, two-helix configuration; f) added a description for the procedure when the turnaround loop diameter is larger than the mandrel diameter for method E11A, two-helix configuration; g) all the figures were updated and the different components labelled; h) added the attenuation monitoring equipment in 4.2 for the apparatus and the description to measure the change in attenuation in the test methods E11A and E11B; i) added Clause 9 for details to be reported; j) added Annex A showing an example of a special mandrel to perform the bend test according to method E11A, two-helix configuration; k) added Annex B providing the rationale for the options of method E11A, two-helix configuration.
Document History
-
DANSK DSF/PREN IEC 60794-1-111
Optical fibre cables – Part 1-111: Generic specification – Basic optical cable test procedures – Mechanical tests methods – Bend, method E11- Historical Version
-
DANSK DS/EN IEC 60794-1-111
viewing
Optical fibre cables – Part 1-111: Generic specification – Basic optical cable test procedures – Mechanical tests methods – Bend, method E11- Most Recent