-
-
Available Formats
- Availability
- Priced From ( in USD )
-
Available Formats
-
- Immediate download
- $58.00
- Add to Cart
-
- Printed Edition
- Ships in 1-2 business days
- $58.00
- Add to Cart
Customers Who Bought This Also Bought
-
ASTM D5608-16
Priced From $48.00 -
ASTM D5121-22
Priced From $48.00 -
ASTM D4373-21
Priced From $52.00 -
ASTM D2922-05
Priced From $60.00
About This Item
Full Description
1.1 This test method covers the determination of in-place density of soil by the drive-cylinder method. The test method involves obtaining a relatively undisturbed soil sample by driving a thin-walled cylinder and the subsequent activities for the determination of in-place density. When sampling or in-place density is required at depth, Test Method D1587 should be used.
1.2 This test method is not appropriate for sampling organic soils which can compress upon sampling, very hard natural soils and heavily compacted soils which cannot be easily penetrated by the drive sampler, soils of low plasticity which will not be readily retained in the cylinder, or soils which contain appreciable amounts of gravel (particles coarser than 4.75 mm (3/16 in.)). The presence of particles coarser than 4.75 mm (3/16in.) may introduce significant errors in density measurements by causing voids along the wall of the cylinder during driving, and when coarse materials have to be dislodged by the trimming of the sample obtained by the cylinder.
1.3 This test method is limited to the procedures necessary for obtaining specimens suitable for determining the in-place density and water content of certain soils. The procedures and precautions necessary for selecting locations and obtaining undisturbed samples suitable for laboratory testing or otherwise determining engineering properties is beyond the scope of this test method.
1.4 It is common practice in the engineering profession to concurrently use pounds to represent both a unit of mass (lbm) and a unit of force (lbf). This implicitly combines two separate systems of units, that is, the absolute system and the gravitational system. It is scientifically undesirable to combine the use of two separate sets of inch-pound units within a single standard. This test method has been written using the gravitational system of units when dealing with the inch-pound system. In this system the pound (lbf) represents a unit of force (weight). However, the use of balances or scales recording pounds of mass (lbm), or the recording of density in lbm/ft 3 should not be regarded as nonconformance with this test method.
1.5 The standard values stated in SI units are to be regarded as the standard. The values in parentheses are provided for information purposes only.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Document History
-
ASTM D2937-24
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method- Most Recent
-
ASTM D2937-17e2
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method- Historical Version
-
ASTM D2937-17e1
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method- Historical Version
-
ASTM D2937-17
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method- Historical Version
-
ASTM D2937-10
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method- Historical Version
-
ASTM D2937-04
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method- Historical Version
-
ASTM D2937-00e1
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method- Historical Version
-
ASTM D2937-00
viewing
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method- Historical Version