Language:
    • Available Formats
    •  
    • Availability
    • Priced From ( in USD )
    • Printed Edition
    • Ships in 1-2 business days
    • $999.00
    • Add to Cart

Customers Who Bought This Also Bought

 

About This Item

 

Full Description

The primary purpose of this Handbook is to provide a source of statistically based material allowables for commonly used metallic materials and joints. Additionally, other mechanical and physical properties needed for the design of aerospace structures are included. The material properties and joint data used to derive values published in this Handbook were obtained from tests conducted by material and fastener producers, government agencies, and members of the airframe industry. The data submitted to MMPDS are reviewed and analyzed per the methods detailed in this Handbook. Results of these analyses are submitted to the membership during coordination meetings and if determined to meet the set document standards they are published in this Handbook.

This Handbook also contains some useful basic formulas for structural element analysis. These formulas are provided in Chapter 1 to illustrate how the material data contained in the Handbook may be used. However, structural design and analysis are beyond the scope of this Handbook. While an attempt is made to assure the accuracy of the formulas and analytical methods contained in Chapter 1, there is no attempt in this Handbook to provide currently accepted design or analytical methods.

References for data and various test methods are listed at the end of each chapter. The reference number corresponds to the applicable paragraph of the chapter cited. Such references are intended to provide sources of additional information, but should not necessarily be considered as containing data suitable for design purposes.

Applicable testing standards are identified by number only in the text. Full titles for these standards are listed in Appendix D.

NOTE: This document contains design information on the mechanical and physical properties of metallic materials and joints commonly used in aircraft and aerospace vehicle structures. All information contained in this Handbook has been reviewed and approved using a standardized process. The development and ongoing maintenance process involves certifying agencies, including the FAA, DoD, and NASA, and major material suppliers and material users worldwide. The information and procedures in this Handbook are continuously reviewed, and modified or removed as determined to be appropriate. With advances in materials and fastener systems, and with the review process of existing information, periodic updates of the MMPDS should be expected. As such, it is recommended that the latest version of the MMPDS be used.

 

Document History

  1. BMI MMPDS-2024, Volume I


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Volume I: Conventional Materials and Joint Allowables, Complete Document (All 9 Chapters)

    • Most Recent
  2. BMI MMPDS-2023

    👀 currently
    viewing


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Volume I: Conventional Materials and Joint Allowables, Complete Document (All 9 Chapters)

    • Historical Version
  3. BMI MMPDS-17


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  4. BMI MMPDS-16


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  5. BMI MMPDS-15


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  6. BMI MMPDS-14


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  7. BMI MMPDS-13


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  8. BMI MMPDS-12


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  9. BMI MMPDS-11


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  10. BMI MMPDS-10


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  11. BMI MMPDS-09


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  12. BMI MMPDS-08


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  13. BMI MMPDS-07


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  14. BMI MMPDS-06


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  15. BMI MMPDS-05


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters)

    • Historical Version
  16. BMI MMPDS-05 Chapter 2


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 2 - Steel Alloys

    • Historical Version
  17. BMI MMPDS-05 Chapter 6


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 6 - Heat Resistant Alloys

    • Historical Version
  18. BMI MMPDS-05 Chapter 8


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 8 - Structural Joints

    • Historical Version
  19. BMI MMPDS-05 Chapter 5


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 5 - Titanium Alloys

    • Historical Version
  20. BMI MMPDS-05 Chapter 7


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 7 - Miscellaneous Alloys

    • Historical Version
  21. BMI MMPDS-05 Chapter 9


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 9 - Guidelines

    • Historical Version
  22. BMI MMPDS-05 Chapter 4


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 4 - Magnesium Alloys

    • Historical Version
  23. BMI MMPDS-05 Chapter 1


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 1 - Introduction

    • Historical Version
  24. BMI MMPDS-05 Chapter 3


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 3 - Aluminum Alloys

    • Historical Version
  25. BMI MMPDS-04 CN-1


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Change Notice 1

    • Historical Version
  26. BMI MMPDS-04


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Complete Document (All 9 Chapters Plus Change Notice 1)

    • Historical Version
  27. BMI MMPDS-04 Chapter 2


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 2 - Steel Alloys

    • Historical Version
  28. BMI MMPDS-04 Chapter 6


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 6 - Heat Resistant Alloys

    • Historical Version
  29. BMI MMPDS-04 Chapter 8


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 8 - Structural Joints

    • Historical Version
  30. BMI MMPDS-04 Chapter 5


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 5 - Titanium Alloys

    • Historical Version
  31. BMI MMPDS-04 Chapter 7


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 7 - Miscellaneous Alloys and Hybrid Materials

    • Historical Version
  32. BMI MMPDS-04 Chapter 9


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 9 - Guidelines

    • Historical Version
  33. BMI MMPDS-04 Chapter 4


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 4 - Magnesium Alloys

    • Historical Version
  34. BMI MMPDS-04 Chapter 1


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 1 - Introduction

    • Historical Version
  35. BMI MMPDS-04 Chapter 3


    Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 3 - Aluminum Alloys (Both Volumes A & B)

    • Historical Version
  36. MIL MMPDS-02


    Metallic Materials Properties Development and Standardization, Complete Set

    • Historical Version
  37. MIL MIL-HDBK-5J


    DEPARTMENT OF DEFENSE HANDBOOK METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES (SUPERSEDING MIL-HDBK-5H) (S/S BY DOT/FAA/AR-MMPDS-01)

    • Historical Version
  38. MIL MIL-HDBK-5H


    METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES (SUPERSEDING MIL-HDBK-5G) (S/S BY MIL-HDBK-5J)

    • Historical Version