-
-
Available Formats
- Availability
- Priced From ( in USD )
-
Available Formats
-
- Immediate download
-
$60.00Members pay $45.00
- Add to Cart
-
- Printed Edition
- Ships in 1-2 business days
-
$60.00Members pay $45.00
- Add to Cart
Customers Who Bought This Also Bought
-
ASTM D8025-23
Priced From $82.00 -
ASTM D6919-17
Priced From $52.00 -
ASTM D4692-01(2017)
Priced From $42.00 -
ASTM F316-03(2019)
Priced From $50.00
About This Item
Full Description
1.1 This test method covers the determination of total and organic carbon in water and waste water, including brackish waters and brines in the range from 2 to 20000 mg/L. This test method has the advantages of a wide range of concentration which may be determined without sample dilution and the provision for boat or capillary introduction of samples containing sediments and particulate matter where syringe injection is inappropriate.
1.2 This procedure is applicable only to that carbonaceous matter in the sample that can be introduced into the reaction zone. When syringe injection is used to introduce samples into the combustion zone, the syringe needle opening size limits the maximum size of particles that can be present in samples. Sludge and sediment samples must be homogenized prior to sampling with a micropipetor or other appropriate sampler and ladle introduction into the combustion zone is required.
1.3 The precision and bias information reported in this test method was obtained in collaborative testing that included waters of the following types: distilled, deionized, potable, natural, brine, municipal and industrial waste, and water derived from oil shale retorting. Since the precision and bias information reported may not apply to waters of all matrices, it is the user's responsibility to ensure the validity of this test method on samples of other matrices.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see 9.1 and 10.2.1.
Document History
-
ASTM D4129-05(2020)
Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection- Most Recent
-
ASTM D4129-05(2013)
Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection- Historical Version
-
ASTM D4129-05(2012)
Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection- Historical Version
-
ASTM D4129-05
Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection- Historical Version
-
ASTM D4129-98(2003)
viewing
Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection- Historical Version
-
ASTM D4129-98
Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection- Historical Version