-
-
Available Formats
- Availability
- Priced From ( in USD )
-
Available Formats
-
- Immediate download
-
$58.00Members pay $43.50
- Add to Cart
-
- Printed Edition
- Ships in 1-2 business days
-
$58.00Members pay $43.50
- Add to Cart
Customers Who Bought This Also Bought
-
ASTM D2361-02
Priced From $52.00 -
ASTM D4650-19
Priced From $54.00 -
ASTM D5357-19
Priced From $42.00 -
ASTM D2013/D2013M-21
Priced From $60.00
About This Item
Full Description
1.1 This test method covers a laboratory procedure for conducting a single froth flotation test on fine coal (that is, nominal top size of 600 [mu]m (No. 30 U.S.A. Standard Sieve Series) or finer) using a defined set of starting point conditions for the operating variables.
1.2 This test method does not completely cover specific procedures for the investigation of flotation kinetics. Such a test is specialized and highly dependent upon the objective of the data.
1.3 Since optimum conditions for flotation are usually not found at the specified starting points, suggestions for development of grade/recovery curves are given in Appendix X1. Such a procedure is very case-specific and involves running a series of flotation tests in which some of the operating variables are changed in order to optimize conditions for either yield or grade.
1.4 Laboratory flotation results need not be representative of the flotation response of coal in full-scale situations, but a consistent baseline can be established against which full-scale performance can be compared.
1.5 The values stated in SI units are to be regarded as standard. The values in parentheses are provided for information only. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.6 This standard does not purport to address the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.6.1 Material Safety Data Sheets (MSDS) for reagents used are to be obtained from suppliers who are to be consulted prior to work with any chemicals used in this test method.
Document History
-
ASTM D5114/D5114M-90(2018)e1
Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell- Most Recent
-
ASTM D5114-90(2010)
Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell- Historical Version
-
ASTM D5114-90(2004)
Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell- Historical Version
-
ASTM D5114-90(1998)
viewing
Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell- Historical Version