BS EN 61800-2:2015

BS EN 61800-2:2015 applies to adjustable speed electric a.c. power drive systems, which include semiconductor power conversion and the means for their control, protection, monitoring, measurement and the a.c. motors.

It applies to adjustable speed electric power drive systems intended to feed a.c. motors from a BDM connected to line-to-line voltages up to and including 1 kV a.c. 50 Hz or 60 Hz and/or voltages up to and including 1,5 kV d.c. input side.

NOTE 1 Adjustable speed electric a.c. power drive systems intended to feed a.c. motors, and with rated converter input voltages above 1 000 V a.c. are covered by IEC 61800-4.

NOTE 2 Adjustable speed electric d.c. power drive systems intended to feed d.c. motors are covered by IEC 61800-1.

NOTE 3 For adjustable speed electric a.c. power drive systems having series-connected electronic power converter sections, the line-to-line voltage is the sum of the series connected input voltages.

Traction applications and electric vehicles are excluded from the scope of this standard.

This part of IEC 61800 is intended to define the following aspects of an a.c. power drive system (PDS):

• principal parts of the PDS;
• ratings and performance;
• specifications for the environment in which the PDS is intended to be installed and operated;
• other specifications which might be applicable when specifying a complete PDS.

This standard provides minimum requirements, which may be used for the development of a specification between customer and manufacturer.

Compliance with this standard is possible only when each topic of this standard is individually specified by the customer developing specifications or by product standard committees developing product standards.

For some aspects which are covered by specific PDS product standards in the IEC 61800 series, this document provides a short introduction and reference to detailed requirements in these product standards.


Cross References:
IEC 60034-9
EN 60034-9
IEC 60038
EN 60038
IEC 60050
IEC 60068
EN 60068
IEC 60068-2-2:2007
EN 60068-2-2:2007
IEC 60068-2-6:2007
EN 60068-2-6:2008
IEC 60068-2-27:2008
EN 60068-2-27:2009
IEC 60068-2-52:1996
EN 60068-2-52:1996
IEC 60068-2-68:1994
EN 60068-2-68:1996
IEC 60068-2-78:2012
EN 60068-2-78:2013
IEC 60079
EN 60079
IEC 60146-1-1
EN 60146-1-1
IEC/TR 60146-1-2
IEC 60529
EN 60529
IEC 60664-1
EN 60664-1
IEC 60721-3-1:1997
EN 60721-3-1:1997
IEC 60721-3-2:1997
EN 60721-3-2:1997
IEC 60721-3-3:1994
IEC 60721-3-3:1994/A1:1995
IEC 60721-3-3:1994/A2:1996
EN 60721-3-3:1995
EN 60721-3-3:1995+A2:1997
IEC 60721-3-4:1995
IEC 60721-3-4:1995/A1:1996
EN 60721-3-4:1995
EN 60721-3-4:1995+A1:1997
IEC 61800-3
EN 61800-3
IEC 61800-5-1:2007
EN 61800-5-1:2007
IEC 61800-5-2:2007
EN 61800-5-2:2007
IEC/TR 61800-6
CLC/TR 61800-6
IEC 61800-7
EN 61800-7
IEC 61800-7-1
EN 61800-7-1
IEC 60027-3
EN 60027-3
IEC 60034-1
EN 60034-1
IEC 60204-1
EN 60204-1
IEC 60364
HD 60364
IEC 61131-2
EN 61131-2
IEC 61158
EN 61158
IEC 61158-1
EN 61158-1
IEC 61158-2
EN 61158-2
IEC 61378-1
EN 61378-1
IEC 61439-1
EN 61439-1
IEC 61800-1
EN 61800-1
IEC 61800-4
EN 61800-4
IEC 60721-2-6
IEC 61378-3
IEC TS 61800-8
IEC TS 62578
EN 50495
EN 50598-2
EN 50598-3
EN 50325-4
CSA C838-13
ANSI/AHRI 1211


Replaces BS EN 61800-2:1998 which remains current

All current amendments available at time of purchase are included with the purchase of this document.