BS EN 378-3:2016

BS EN 378-3:2016 specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.

The term "refrigerating system" used in this European Standard includes heat pumps.

This Part 3 of the European Standard is applicable to the installation site (plant space and services). It specifies requirements on the site for safety, which may be needed because of, but not directly connected with, the refrigerating system and its ancillary components.

This standard applies:

• to refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by a specific product standard e.g. ISO 13043;
• to secondary cooling or heating systems;
• to the location of the refrigerating systems;
• to replaced parts and added components after adoption of this standard if they are not identical in function and in the capacity.

Systems using refrigerants other than those listed in of EN 378-1:2016, Annex E are not covered by this standard.

This standard does not apply to goods in storage.

This standard is not applicable to refrigerating systems which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.

This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.

This standard also applies in the case of the conversion of a system for another refrigerant type, in which case conformity with the relevant clauses of parts 1 to 4 of the standard shall be assessed.


Cross References:
EN 378-1:2016
EN 378-2:2016
EN 1363
EN 1364
EN 1365
EN 1366-1
EN 1366-2
EN 1507
EN 1634
EN 12236
EN 12845
EN 14624
EN 60079-10-1
IEC 60079-10-1
EN 60204-1:2006
IEC 60204-1:2005
EN 60529
IEC 60529
EN ISO 13850
ISO 13850
EN ISO 14122-2
ISO 14122-2
ISO 13043
ISO 817
IEC 60364
EN 132
EN 133
EN 134
EN 135
EN 136
EN 137
EN 378-4
EN 14387
EN 14593-1
EN 14593-2
EN 14594
EN 60079-0
IEC 60079-0
EN 60079-29-2
IEC 60079-29-2
IEC/TR 61200-52


All current amendments available at time of purchase are included with the purchase of this document.