-
-
Available Formats
- Options
- Availability
- Priced From ( in USD )
-
Available Formats
-
- Immediate download
- $166.00
- Add to Cart
-
- Printed Edition
- Ships in 1-2 business days
- $166.00
- Add to Cart
-
- Printed Edition + PDF
- Immediate download
- $259.00
- Add to Cart
Customers Who Bought This Also Bought
-
ISO 10370:2014
Priced From $81.00 -
ISO 3171:1988
Priced From $250.00 -
ISO 1998-7:1998
Priced From $54.00 -
ISO 2049:1996
Priced From $54.00
About This Item
Full Description
ISO 2719:2016 describes three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C.
CAUTION - For certain mixtures no flash point, as defined, is observed; instead a significant enlargement of the test flame (not halo effect) and a change in colour of the test flame from blue to yellowish-orange can occur. Continued heating can result in significant burning of vapours outside the test cup, and can be a potential fire hazard.
NOTE 1 Although, technically, kerosene with a flash point above 40 °C can be tested using this International Standard, it is standard practice to test kerosene according to ISO 13736.[5] Similarly, lubricating oils are normally tested according to ISO 2592[2].
Procedure A is applicable to distillate fuels (diesel, biodiesel blends, heating oil and turbine fuels), new and in-use lubricating oils, paints and varnishes, and other homogeneous liquids not included in the scope of Procedures B or C.
Procedure B is applicable to residual fuel oils, cutback residua, used lubricating oils, mixtures of liquids with solids, liquids that tend to form a surface film under test conditions or are of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of Procedure A.
Procedure C is applicable to fatty acid methyl esters (FAME) as specified in specifications such as EN 14214[11] or ASTM D6751[13].
ISO 2719:2016 is not applicable to water-borne paints and varnishes.
NOTE 2 Water-borne paints and varnishes can be tested using ISO 3679[3]. Liquids containing traces of highly volatile materials can be tested using ISO 1523[1] or ISO 3679.
Document History
-
ISO 2719:2016
viewing
Determination of flash point - Pensky-Martens closed cup method- Most Recent
-
ISO 2719:2002
Determination of flash point - Pensky-Martens closed cup method- Historical Version
-
ISO 2719:1988
Petroleum products and lubricants -- Determination of flash point -- Pensky-Martens closed cup method- Historical Version