-
-
Available Formats
- Options
- Availability
- Priced From ( in USD )
-
Available Formats
-
- Secure PDF 🔒
- Immediate download
- $309.88
- Add to Cart
-
- Printed Edition
- Ships in 1-2 business days
- $309.88
- Add to Cart
-
- Printed Edition + PDF
- Immediate download
- $417.83
- Add to Cart
Customers Who Bought This Also Bought
-
BS EN IEC 55025:2022
Priced From $398.78 -
BS EN 60255-26:2013
Priced From $368.30 -
BS EN 61000-3-3:2013+A2:2021
Priced From $350.52 -
BS EN 61000-4-2:2009
Priced From $368.30
About This Item
Full Description
The object of BS EN 61000-4-4:2004+A1:2010 is to establish a common and reproducible reference for evaluating the immunity of electrical and electronic equipment when subjected to electrical fast transient/bursts on supply, signal, control and earth ports. The test method documented in this part of IEC 61000-4 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon.
NOTE As described in IEC Guide 107, this is a basic EMC publication for use by product committees of the IEC. As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunity test standard should be applied or not, and if applied, they are responsible for determining the appropriate test levels and performance criteria. TC 77 and its sub-committees are prepared to co-operate with product committees in the evaluation of the value of particular immunity tests for their products.
BS EN 61000-4-4:2004+A1:2010 defines:
- test voltage waveform;
- range of test levels;
- test equipment;
- verification procedures of test equipment;
- test set-up;
- test procedure.
BS EN 61000-4-4:2004+A1:2010 gives specifications for laboratory and post-installation tests..
Cross References:
IEC 60050-161:1990
IEC 60050-300:2001
IEC 61000-4-4:1995
Incorporates the following:
AMD 16840 published 31 January 2007
AMD 16840 is a Corrigendum. Corrigendum, April 2008. Amendment, May 2010. Amends and replaces BS EN 61000-4-4:2004 which remains current
Document History
-
BS EN 61000-4-4:2012
Electromagnetic compatibility (EMC)-Testing and measurement techniques. Electrical fast transient/burst immunity test- Most Recent
-
BS EN 61000-4-18:2007+A1:2010
Electromagnetic compatibility (EMC)-Testing and measurement techniques. Damped oscillatory wave immunity test- Historical Version
-
BS EN 61000-4-4:2004+A1:2010
viewing
Electromagnetic compatibility (EMC)-Testing and measurement techniques. Electrical fast transient/burst immunity test- Historical Version
-
BS EN 61000-3-3:1995+A2:2005
Electromagnetic compatibility (EMC)-Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection- Historical Version
-
BS 09/30211124 DC
BS EN 61000-4-4. Electromagnetic compatibility (EMC). Part 4-4. Testing and measurement techniques. Electrical fast transient/burst immunity test- Historical Version
-
BS DD IEC/TS 61000-1-2:2008
Electromagnetic compatibility (EMC)-General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena- Historical Version
-
BS EN 61000-4-20:2003
Electromagnetic Compatibility (EMC)-Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides- Historical Version
-
BS 07/30171041 DC
DD IEC/TS 61000-1-2. Electromagnetic compatibility. General. methodology for the achievement of functional safety of electrical and electronic equipment with regard to electromagnetic phenomena- Historical Version
-
BS EN 61000-4-30:2003
Electromagnetic compatibility (EMC). Testing and measurement techniques-Power quality measurement methods- Historical Version
-
BS EN 61000-6-1:2001
Electromagnetic compatibility (EMC)-Generic standards. Immunity for residential, commercial and light-industrial environments- Historical Version
-
BS EN 61000-4-4:2004
Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test- Historical Version
-
BS EN 61000-4-21:2003
Electromagnetic compatibility (EMC). Testing and measurement techniques-Reverberation chamber test methods- Historical Version
-
BS EN 61000-4-4:1995
Electromagnetic compatibility (EMC). Testing and measurement techniques-Electrical fast transient/burst immunity test. Basic EMC publication- Historical Version
-
BS DD IEC/TS 61000-1-2:2001
Electromagnetic compatibility (EMC). General-Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena- Historical Version
-
BS EN 61000-4-12:1996
Electromagnetic compatibility (EMC). Testing and measurement techniques-Oscillatory waves immunity test. Basic EMC publication- Historical Version
-
BS EN 61000-4-8:1994
Electromagnetic compatibility (EMC). Testing and measurement techniques-Power frequency magnetic field immunity test. Basic EMC publication- Historical Version
-
BS EN 61000-4-10:1994
Electromagnetic compatibility (EMC). Testing and measurement techniques-Damped oscillatory magnetic field immunity test. Basic EMC publication- Historical Version
-
BS EN 61000-4-3:1997
Electromagnetic compatibility (EMC)-Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test- Historical Version
-
BS EN 61000-4-2:1995
Electromagnetic compatibility (EMC). Testing and measurement techniques-Electrostatic discharge immunity test. Basic EMC publication- Historical Version
-
BS EN 61000-4-5:1995
Electromagnetic compatibility (EMC). Testing and measurement techniques-Surge immunity test- Historical Version
-
BS EN 50054:1999
Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods- Historical Version
-
BS EN 50055:1999
Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air- Historical Version
-
BS EN 50082-1:1998
Electromagnetic compatibility. Generic immunity standard-Residential, commercial and light industry- Historical Version
-
BS EN 50082-2:1995
Electromagnetic compatibility. Generic immunity standard-Industrial environment- Historical Version
-
BS EN 61000-3-3:1995
Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current < 16 A per phase and not subject to conditional connection- Historical Version
-
BS EN 61000-2-4:1995
Electromagnetic compatibility (EMC). Environment-Compatibility levels in industrial plants for low-frequency conducted disturbances- Historical Version
-
BS EN 61000-4-1:1995
Electromagnetic compatibility (EMC). Testing and measurement techniques-Overview of immunity tests. Basic EMC publication- Historical Version
-
BS DD ENV 50140:1994
Electromagnetic compatibility. Basic immunity standard. Radiated radio-frequency electromagnetic field. Immunity test- Historical Version
-
BS EN 50082-1:1992
Electromagnetic compatibility. Generic immunity standard-Residential, commercial and light industry- Historical Version
-
BS EN 50054:1991
Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods- Historical Version
-
BS EN 50055:1991
Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air- Historical Version
-
BS 6020-1:1981
Instruments for the detection of combustible gases-Specification for general requirements and test methods- Historical Version
-
BS 6020-2:1981
Instruments for the detection of combustible gases-Specification for safety and performance requirements for Group I instruments reading up to 5% methane in air- Historical Version
-
BS 5406-3:1988
Disturbances in supply systems caused by household appliances and similar electrical equipment-Specification of voltage fluctuations- Historical Version
-
BS 6667-1:1985
Electromagnetic compatibility for industrial-process measurement and control equipment-General introduction- Historical Version
-
BS 6667-3:1985
Electromagnetic compatibility for industrial-process measurement and control equipment-Method of evaluating susceptibility to radiated electromagnetic energy- Historical Version
-
BS 5406:1976
The limitation of disturbances in electricity supply networks caused by domestic and similar appliances equipped with electronic devices- Historical Version