Harris and McQuiston (1988) developed conduction transfer function (CTF) coefficients corresponding to 41 representative wall assemblies and 42 representative roof assem-blies for use with the transfer function method (TFM). They also developed a grouping procedure that allows design engineers to determine the correct representative wall or roof assembly that most closely matches a specific wall or roof assembly. The CTF coefficients and the grouping procedure have been summarized in the ASHRAE Handbook --Fundamentals (1989, 1993, 1997) and the ASHRAE Cooling and Heating Load Calculation Manual, second edition (McQuiston and Spitler 1992). More recently, a new, simplified design cooling load calculation procedure, the radiant time series method (RTSM), has been developed (Spitler et al. 1997). The RTSM uses periodic response factors to model transient conductive heat transfer. While not a true manual load calculation procedure, it is quite feasible to implement the RTSM in a spreadsheet. To be useful in such an environment, it would be desirable to have a pre-calculated set of periodic response factors. Accordingly, a set of periodic response factors has been calculated and is presented in this paper.

Units: Dual