BS EN 13611:2015

BS EN 13611:2015 specifies the general safety, design, construction, and performance requirements and testing for safety, control or regulating devices (hereafter referred to as controls) for burners and appliances burning one or more gaseous fuels or liquid fuels.

This European Standard is applicable to controls with declared maximum inlet pressure up to and including 500 kPa of nominal connection sizes up to and including DN 250.

This European standard specifies general product requirements for the following controls:

• automatic shut-off valves;
• automatic burner control systems;
• flame supervision devices;
• gas/air ratio controls;
• pressure regulators;
• manual taps;
• mechanical thermostats;
• multifunctional controls;
• pressure sensing devices;
• valve proving systems;
• automatic vent valves.

This European standard applies for control functions that are not covered by a specific control standard for burners and appliances burning one or more gaseous fuels or liquid fuels.

This European Standard applies also for safety accessories and pressure accessories with a product of the maximum allowable pressure PS and the volume V of less than 600 000 kPa · dm3 (6 000 bar? litres) or with a product of PS and DN of less than 300 000 kPa (3 000 bar).

This European Standard applies for AC and DC supplied controls (for controls supplied by stand-alone battery system, battery systems for mobile applications or systems which are intended to be connected to DC supply networks controls see Annex I).

This European Standard is applicable to reset functions used for reset from lockout, e.g. due to ignition failure or temperature cut-out in burners and appliances (see Annex M).

This European Standard establishes methodologies for the determination of a Safety Integrity Level (SIL) and the determination of a Performance Level (PL) (see Annex J, Annex K and Annex L).

This European Standard gives guidelines for environmental aspects (see Annex N).

This European Standard does not apply to mechanical controls for use with liquid fuels. The protection against environmental impact in open air (i.e. capable of withstanding UV radiation, wind, rain, snow, dirt deposits, condensation, ice and hoar frost (see IEV 441-11-05:2005), earthquake and external fire) is not covered by this standard.

This European Standard should be used in conjunction with the specific control standard (see Bibliography).


Cross References:
EN 485-2:2013
EN 549:1994
EN 586-2:1994
EN 754-2:2013
EN 755-2:2013
EN 1057:2006+A1:2010
EN 1563:2011
EN 1559-1:2011
EN 1652:1997
EN 1706:2010
EN 1774:1997
EN 1982:2008
EN 10025-1:2004
EN 10028-2:2009
EN 10028-3:2009
EN 10028-4:2009
EN 10028-5:2009
EN 10028-6:2009
EN 10028-7:2007
EN 10083-1:2006
EN 10083-2:2006
EN 10087:1998
EN 10088-1:2014
EN 10088-3:2014
EN 10111:2008
EN 10130:2006
EN 10213:2007
EN 10216-1:2013
EN 10216-5:2013
EN 10222-1:1998
EN 10222-5:1999
EN 10226-1:2004
EN 10226-2:2005
EN 10250-1:1999
EN 10250-2:1999
EN 10250-4:1999
EN 10255:2004+A1:2007
EN 10272:2007
EN 10277-3:2008
EN 10293:2015
EN 10297-1:2003
EN 10305-1:2010
EN 10305-4:2011
EN 10346:2009
EN 12164:2011
EN 12165:2011
EN 12186:2014
EN 12279:2000
EN 12516-1:2014
EN 13445-4:2014
EN 13555:2014
EN 13906-1:2013
EN 13906-2:2013
EN 50159:2010
EN 60068-2-6:2008
IEC 60068-2-6:2007
EN 60384-14:2013
IEC 60384-14:2010
EN 60384-16:2005
IEC 60384-16:2004
EN 60529:1991
IEC 60529:1989
prEN 60730-1:2013
IEC 60730-1:2013
EN 60747-5-2:2001
IEC 60747-5-2:1997
EN 60947-5-1:2004
IEC 60947-5-1:2003
EN 61000-4-29:2000
IEC 61000-4-29:2000
EN 61508-1:2010
IEC 61508-1:2010
EN 61508-2:2010
IEC 61508-2:2010
EN 61508-3:2010
IEC 61508-3:2010
EN 61508-4:2010
IEC 61508-4:2010
EN 61508-6:2010
IEC 61508-6:2010
EN 61508-7:2010
IEC 61508-7:2010
EN 61558-2-6:2009
IEC 61558-2-6:2009
EN 61558-2-16:2009
IEC 61558-2-16:2009
EN 61643-11:2012
IEC 61643-11:2011
EN 61810-1:2008
IEC 61810-1:2008
EN 62061:2005
IEC 62061:2005
EN ISO 228-1:2003
ISO 228-1:2000
EN ISO 898-1:2013
ISO 898-1:2013
EN ISO 898-2:2012
ISO 898-2:2012
EN ISO 3506-1:2009
ISO 3506-1:2009
EN ISO 3506-2:2009
ISO 3506-2:2009
EN ISO 3506-3:2009
ISO 3506-3:2009
EN ISO 8434-1:2007
ISO 8434-1:2007
EN ISO 9606-1:2013
ISO 9606-1:2012
EN ISO 9606-2:2004
ISO 9606-2:2004
EN ISO 9606-3


All current amendments available at time of purchase are included with the purchase of this document.