BS EN 61810-2:2017

BS EN 61810-2:2017 covers test conditions and provisions for the evaluation of endurance tests using appropriate statistical methods to obtain reliability characteristics for relays.

This document applies to electromechanical elementary relays considered as non-repaired items (i.e. items which are not repaired after failure).

The lifetime of a relay is usually expressed in number of cycles (CTF). Therefore, whenever the terms "time" or "duration" are used in IEC 61649, they carry the meaning "cycles". However, with a given frequency of operation, the number of cycles can be transformed into respective times (e.g. times to failure (TTF)).

The failure criteria and the resulting characteristics of elementary relays describing their reliability in normal use are specified in this document. A relay failure occurs when the specified failure criteria are met.

As the failure rate for elementary relays cannot be considered as constant, particularly due to wear-out mechanisms, the cycles to failure of tested items typically show a Weibull distribution. This document provides numerical and graphical methods to calculate approximate values for the two-parameter Weibull distribution, as well as lower confidence limits and a method for confirmation of reliability values with the WeiBayes method.

This document does not cover procedures for electromechanical elementary relays where enhanced requirements for the verification of reliability apply.


Cross References:
IEC 61810-1:2015
IEC 61649:2008
EN 61649 (IEC 61649:2008) AS
EN 61810-1:2015
ISO 3534
ISO 2854
IEC 60300-3-5:2001
IEC 60050-191:1990
IEC 60605-6:2007
EN 61810-3:2015
IEC 61810-3:2015
ISO 13849-1:2015
IEC 61810-2-1:2017
ISO 3534-1:2006
EN 61810-2-1:2017
EN ISO 13849-1 (ISO 13849-1:2015) AS
IEC 62061:2005
IEC 60605-4:2001
EN 62061 (IEC 62061:2005) AS


All current amendments available at time of purchase are included with the purchase of this document.