BS EN 15194:2017 applies to EPAC bicycles for private and commercial use with exception of EPAC intended for hire from unattended station.

This European Standard is intended to cover all common significant hazards, hazardous situations and events (see Clause 4) of electrically power assisted bicycles, when used as intended and under condition of misuse that are reasonably foreseeable by the manufacturer.

This European Standard is intended to cover electrically power assisted bicycles of a type which have a maximum continuous rated power of 0,25 kW, of which the output is progressively reduced and finally cut off as the EPAC reaches a speed of 25 km/h, or sooner, if the cyclist stops pedalling.

This European Standard specifies requirements and test methods for engine power management systems, electrical circuits including the charging system for the design and assembly of electrically power assisted bicycles and sub-assemblies for systems having a rated voltage up to and including 48 V d.c. or integrated battery charger with a nominal 230 V a.c. input.

This European Standard specifies safety and safety related performance requirements for the design, assembly, and testing of EPAC bicycles and subassemblies intended for use on public roads, and lays down guidelines for instructions on the use and care of such bicycles.

This European Standard applies to EPAC bicycles that have a maximum saddle height of 635 mm or more and that are intended for use on public roads.

This European Standard is not applicable to EPACs which are manufactured before the date of its publication as EN.


Cross References:
EN 61000-3-2 (IEC 61000-3-2:2014) AS
ISO 11452-4:2011
ISO 5775-1:2014 ED6
IEC 61000-4-2:2008 Ed 2
ISO 6742-1:2015
HD 60364-5-52:2011
IEC 60364-5-52:2009
ISO 11243:2016
ISO 6742-2:2015
ISO 12100:2010 Ed 1
EN 60529:1991
IEC 60034-1:2010
ISO 5775-2:2015
ISO 13849-1:2015
EN 50604-1:2016
ISO 7010:2011
ISO 11452-1:2015
ISO 11452-3:2016
EN 55016-1-1:2010
CISPR 16-1-1:2010
CISPR 25:2008
EN 60335-1:2012
EN 61000-4-2:2009
ISO 2248:1985
CISPR 12:2007
EN 55012:2007
EN ISO 11243:2016
EN ISO 12100:2010
EN 60034-1:2010
ISO 11452-2:2004
IEC 60068-2-75:2014
EN 55025:2008
EN 60068-2-75:2014
EN 22248:1992
IEC 60335-1:2010
EN ISO 13849-1:2015
IEC 60529:1989
EN ISO 7010:2012
ISO 9633:2001
ISO 11451-1:2015
ISO 11452-5:2002
EN 61951-2
IEC 61960
EN ISO 3452-2
IEC 62133
EN 82079-1
EN ISO 3452-3
EN 61951-1:2017
ISO 8124-1:2014
IEC 60335-2-29:2016
ISO 3452-4:1998
ISO 13849-2:2012
EN 60335-2-29:2004/A11
IEC 61951-1:2001
EN 62133 (IEC 62133:2002) AS
ISO 13715:2017
IEC 61951-2:2003
EN 61960-3:2017
ISO 2575:2004 Ed 7
EN 62281:2017
IEC 60245-1:1994
ISO 3452-1:2013
EN 61959 (IEC 61959:2004) AS
IEC TR 62188
IEC 61959
iso 3452-3


All current amendments available at time of purchase are included with the purchase of this document.